TX6

Minimal, pure and up-to-date vanilla Debian/Ubuntu Linux SD card image for TX6.


Board name
TX6
Board maker
Tanix
SoC
Allwinner H6
CPU
ARM Cortex A53 (armv8)

Install instructions

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).

wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card

When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).


Downloads for TX6

Downloads relevant to TX6.
File Description Build date Size
PLACEHOLDER Boot image U-Boot PLACEHOLDER TF-A PLACEHOLDER RPi boot FW PLACEHOLDER AML boot FW PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Debian oldstable/11.9 ("bullseye") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Debian stable/12.5 ("bookworm") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Debian testing ("trixie") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Debian unstable ("sid") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Debian experimental ("rc-buggy") image Experimental Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Ubuntu 20.04 LTS ("focal") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Ubuntu 22.04 LTS ("jammy") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Ubuntu 23.10 ("mantic") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER
PLACEHOLDER Ubuntu 24.04 LTS ("noble") image Kernel PLACEHOLDER PLACEHOLDER PLACEHOLDER

Boards by Tanix

Boards made by Tanix.
Board Board maker SoC CPU
TX6 Tanix Allwinner H6 ARM Cortex A53 (armv8)

Boards with Allwinner H6

Boards with Allwinner H6 SoC.
Board Board maker SoC CPU
TX6 Tanix Allwinner H6 ARM Cortex A53 (armv8)
Orange Pi 3 Xunlong Allwinner H6 ARM Cortex A53 (armv8)
Orange Pi Lite2 Xunlong Allwinner H6 ARM Cortex A53 (armv8)
Orange Pi One Plus Xunlong Allwinner H6 ARM Cortex A53 (armv8)
Pine H64 Pine64 Allwinner H6 ARM Cortex A53 (armv8)