QEMU arm virt
Minimal, pure and up-to-date vanilla Debian/Ubuntu Linux SD card image for QEMU arm virt.
- Board name
- QEMU arm virt
- Board maker
- QEMU
- SoC
- QEMU arm
- CPU
- ARM Cortex A15 (armv7)
Install instructions
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
Downloads for QEMU arm virt
| File | Description | Build date | Size |
|---|---|---|---|
| PLACEHOLDER | Boot image U-Boot PLACEHOLDER TF-A PLACEHOLDER RPi boot FW PLACEHOLDER AML boot FW PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian oldstable/11.9 ("bullseye") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian stable/12.5 ("bookworm") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian testing ("trixie") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian unstable ("sid") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian experimental ("rc-buggy") image Experimental Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 20.04 LTS ("focal") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 22.04 LTS ("jammy") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 23.10 ("mantic") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 24.04 LTS ("noble") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
Boards by QEMU
| Board | Board maker | SoC | CPU |
|---|---|---|---|
| QEMU arm virt | QEMU | QEMU arm | ARM Cortex A15 (armv7) |
| QEMU aarch64 virt | QEMU | QEMU aarch64 | ARM Cortex A53 (armv8) |
Boards with QEMU arm
| Board | Board maker | SoC | CPU |
|---|---|---|---|
| QEMU arm virt | QEMU | QEMU arm | ARM Cortex A15 (armv7) |