Raspberry Pi Zero 2 W
Minimal, pure and up-to-date vanilla Debian/Ubuntu Linux SD card image for Raspberry Pi Zero 2 W.
- Board name
- Raspberry Pi Zero 2 W
- Board maker
- Raspberry Pi Foundation
- SoC
- Broadcom BCM2837
- CPU
- ARM Cortex A53 (armv8)
Install instructions
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
curl -O https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
Downloads for Raspberry Pi Zero 2 W
| File | Description | Build date | Size |
|---|---|---|---|
| PLACEHOLDER | Boot image U-Boot PLACEHOLDER TF-A PLACEHOLDER RPi boot FW PLACEHOLDER AML boot FW PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian oldstable/11.11 ("bullseye") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian stable/12.10 ("bookworm") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian testing ("trixie") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian unstable ("sid") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Debian experimental ("rc-buggy") image Experimental Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 22.04 LTS ("jammy") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 24.04 LTS ("noble") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 24.10 ("oracular") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 25.04 ("plucky") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
| PLACEHOLDER | Ubuntu 25.10 ("questing") image Experimental Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
Boards by Raspberry Pi Foundation
| Board | Board maker | SoC | CPU |
|---|---|---|---|
| Raspberry Pi Zero 2 W | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 2 B | Raspberry Pi Foundation | Broadcom BCM2836 | ARM Cortex A7 (armv7) |
| Raspberry Pi 3 A+ | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 3 B | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 3 B+ | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 4 B | Raspberry Pi Foundation | Broadcom BCM2711 | ARM Cortex A72 (armv8) |
| Raspberry Pi 400 | Raspberry Pi Foundation | Broadcom BCM2711 | ARM Cortex A72 (armv8) |
Boards with Broadcom BCM2837
| Board | Board maker | SoC | CPU |
|---|---|---|---|
| Raspberry Pi Zero 2 W | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 3 A+ | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 3 B | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |
| Raspberry Pi 3 B+ | Raspberry Pi Foundation | Broadcom BCM2837 | ARM Cortex A53 (armv8) |