G2 (MK802+)
Minimal, pure and up-to-date vanilla Debian/Ubuntu Linux SD card image for G2 (MK802+).
- Board name
- G2 (MK802+)
- Board maker
- Semitime
- SoC
- Allwinner A10s
- CPU
- ARM Cortex A8 (armv7)
Install instructions
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
wget https://dl.sd-card-images.johang.se/PLACEHOLDER1.bin.gz
wget https://dl.sd-card-images.johang.se/PLACEHOLDER2.bin.gz
zcat boot.bin.gz debian.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sdXXX # ...where /dev/sdXXX is your SD card
When the dd
command is done, put the SD card in your board and power it on. The board will boot up and assign itself an IP address using DHCP. The last part of the Debian/Ubuntu image filename is the default root password ("PLACEHOLDER" for this image).
Downloads for G2 (MK802+)
File | Description | Build date | Size |
---|---|---|---|
PLACEHOLDER | Boot image U-Boot PLACEHOLDER TF-A PLACEHOLDER RPi boot FW PLACEHOLDER AML boot FW PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Debian oldstable/11.11 ("bullseye") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Debian stable/12.7 ("bookworm") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Debian testing ("trixie") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Debian unstable ("sid") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Debian experimental ("rc-buggy") image Experimental Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Ubuntu 20.04 LTS ("focal") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Ubuntu 22.04 LTS ("jammy") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Ubuntu 24.04 LTS ("noble") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
PLACEHOLDER | Ubuntu 24.10 ("oracular") image Kernel PLACEHOLDER | PLACEHOLDER | PLACEHOLDER |
Boards by Semitime
Board | Board maker | SoC | CPU |
---|---|---|---|
G2 (MK802+) | Semitime | Allwinner A10s | ARM Cortex A8 (armv7) |
Boards with Allwinner A10s
Board | Board maker | SoC | CPU |
---|---|---|---|
G2 (MK802+) | Semitime | Allwinner A10s | ARM Cortex A8 (armv7) |
A10s-OLinuXino MICRO | Olimex | Allwinner A10s | ARM Cortex A8 (armv7) |